Brass Strip Brush
The brass bar brush seal is a flexible shield that protects against the mist, dust, light, heat or intrusion into the point of operation. When mounted on equipment to contact conveyed product, brass strip brushes can be used as a product hold down, static reducer, insulating coating hole detector, an applicator for wet or dry coatings or to remove loose Material duster. When incorporated into a brass, steel or stainless steel channel backing, brass wire is softer than steel or stainless steel wire and has the property of not scratching harder metals for static reduction applications
Brass wire is also relatively corrosion-resistant and won’t spark when hitting other metal surfaces
Material: Brass
Hair length: 10mm–400mm,
Gross diameter: 0.08–0.6mm,
Card slot size: 3-4-5-6-7-8-10mm
Product length: 10mm–5000mm
Specifications – Strip Brush
A mm | B mm | C mm | D mm | E mm | Filler |
2.5 | 0.07 | 15 | 35 | 30-2000 | nylon |
3 | 0. 1 | 25 | 60 | 30-2000 | nylon |
4 | 0.2 | 30 | 80 | 30-2000 | nylon |
5 | 0.3 | 50 | 100 | 30-2000 | nylon |
6 | 0.4 | 80 | 150 | 30-2000 | nylon |
7 | 0.5 | 100 | 200 | 30-2000 | nylon |
8 | 0.6 | 160 | 260 | 30-2000 | nylon |
9 | 0.7 | 200 | 300 | 30-2000 | nylon |
10 | 0.8 | 300 | 500 | 30-2000 | nylon |
Shaped Strip Brushes
For special applications and on the specific designs of the customer, the cylindrical brushes can be shaped with all types of filament: synthetic, natural, metallic, or mixed.
Given the particular characteristics of performance depending on the profile of the brush, our technical office will advise on the best brush for the type of profile and the filament to be used.