Industrial Grinding Brush(Cylindrical)
For heavily contaminated surfaces (due to years of use or contamination), steel or nylon grinding brushes can be used to restore a rustic appearance. For waste wood, we use 60,80, or 120 mm flexibility
Nylon grinding brush or fine steel brush. Even the timber of the hull or railroad wagon can again get its due appearance.
Specifications – Cylindrical Brushes
Polyester PBT: Compared to nylon, polyester is harder, has a better flick effect, has a longer duration, and has a better performance in wet or humid conditions, but at a higher price. Large diameter (over 0.8 mm) polyester starts fatigue in the cylinder main broom after about 120 hours of use. It will not occur on the side brush. Excellent wear-resistant life.
Nylon: Nylon sweeps are not as aggressive as polyester and perform poorly in wet or high humidity conditions. Due to its toughness and excellent long-term wear characteristics, it is often used for external rough surfaces or high-temperature environments. It is generally used in foundries to clean high-temperature debris of up to 150 degrees C. Excellent wear-resistant life.
wash | Nylon 6.6 / PPL |
polishing | Mill nylon Sand grains 2000-600 alumina |
fine machining | Mill nylon Sands at 500-240 alumina |
shift | Mill nylon Sand at: 180-80 carborundum |
Strong removal (Break the surface debris) | Mill nylon Sand, Sand 60-36 carborundum |
Not sure what exact measurements you need for your custom block brush? Or would you much rather order a brush through a live person over the phone?